200# high speed double twisting machine

1. [Equipment Application]:

Widely used in the twisting of various soft/hard conductor wires (copper wire, enameled wire, tinned wire, copper-clad steel, copper-clad aluminum, etc.) and electronic wires, such as: power cords, telephone lines, audio lines, video lines, Car lines, network lines, etc.

2. [Technical Features Technique Feature]:

1. The maximum spindle speed is 3000-4500rpm.

2. Automatic tension control: When twisting, the tension of the take-up line needs to be continuously increased when the take-up line is received from the bottom of the pan. Stop to adjust the tension.

3. The main machine is lubricated by butter and cooled by natural circulation, which effectively prolongs the service life of the main shaft bearing.

4. The wire passing system adopts a new structure, the wire passes directly from the main shaft guide wheel to the bow belt, which reduces the scratches and strand jumping caused by the failure of the corner guide wheel on the aluminum plate.

5. There are three compression devices inside the machine to ensure the roundness of the conductors after twisting and reduce the loss of insulating materials.

6. The whole machine is driven by a synchronous belt. There is no lubricating point inside the machine, so the inside of the machine is kept clean and the twisted wires are free of oil.

7. To adjust the pitch, you only need to replace a change gear, and to adjust the twist direction, you only need to pull the reversing lever, which is a simple operation, thereby reducing the operator's error rate and work intensity. The bearings of the whole machine are all made of well-known Japanese brands, and the bow belt is made of new spring steel material, which is flexible and can avoid stock jumping caused by vibration during high-speed operation. The frequency converter, PLC, magnetic powder clutch, electromagnetic brake, hydraulic jack, etc. are all imported Famous brand, reduce failure rate and maintenance cost.